Vapour Kamalok Couplings
 • Hose shank coupler with probe
that actuates the poppet in a
633LVH, 611T or 633FPV
vapor adaptor
• Available in 3"x3", 4"x4", and
4"x3" configurations
| 633CV-AL4030 |
4”vapour kamlok coupling with hose tail for 3” hose, MS levers |
| 633CV-AL4040 |
4”vapour kamlok coupling with hose tail for 4” hose, MS levers |
| D00272B |
Brass handle for 633CV |
| H20546M |
Seal 4” for 633CV |
| 633CV-AL4040-ST |
4”vapour kamlok coupling with hose tail for 4” hose, ST levers |
| 633CV-AL3030-ST |
3”vapour kamlok coupling with hose tail for 3” hose, ST levers |
| 633RCV-AL4030 |
4”vapour kamlok coupling with thread 3” female BSP |
Adapter for vapour recovery
 Vapor Recovery
Adaptor is designed to maximize efficiency of vapor
recovery with a minimum pressure drop. The Vapor
Recovery Adaptor is in accordance with API RP 1004,
ADR and EN13081 standards.
• 4" size or DN100
• Aluminum construction
• Connections:
4" TTMA flange
Vapor coupler connected on hose side with a 4"
Kamlok (spec. MIL-C 27487) quick coupler
• VITON® seals compatible with all fuel grades and
additives
• Standard on the 633LVB sight glass and drain plug.
| 633LVB-201 |
4” High fl ow vapour recovery adaptor equipped with sight glass |
| 1711Т-7085 |
Plastic dust cap for 633LVB-201 |
Vent valves
 Vapour line valve provides additional safety and security when carrying hazardous liquids. Pressure is vented into the atmosphere when it is not sealed for vapor transfer. In case of vapour transfer, vapour line valve is closed.
The Civacon T195SV Vapor Recovery Vent is designed and tested
for temperature range rated at -40ºC to 71ºC.
A newcap design threads into the top of the vent allows
for a better seal and corrosion free design.
The new design retrofits the current 1985SV and 1986SV.
The presence of a locking ring prevents additional leak paths that
were created by the bolt on feature of the previous1985SV.
The locking ring allows more freedom for mounting the vent
to the normal TTMA bolt pattern.
Seals have been improved to be more compatible with
chemicals that could potentially come into contact with them.
| Т195SVE |
Vapor recovery vent, EN13083 |
| 1995TWD-2B |
VAPOR-LINE VENT WITH TW-FLANGE (replaces 1995TWD-2) |
| 199TWD-SV |
VAPOR-LINE VENT (SMART VENT) WITH TW-FLANGE |
| LC-94021 |
VAPOUR HOSE, LENGTH 15 CM, EXCL CLAMPS. |
| SK-088 |
Clamp 80-85mm, for LC-94021 |
PKVF 65/1B Vapour recovery valve
 Vapour transfer valve with flame arrester
and sequence control, leak-proof in case of
overturned tank
• pneumatically actuated, for mineral oil
tankers and non-corrosive vapours
• with pneumatic sequence control,
diameter of opening 3”
• connection flange according to
DIN 28 461 TW 1
• outlet with connection to vapour
recovery line for TW hose DN 80
| AH-1231398 |
PKVF-65/1B . sequence control, prepared for flamearrester LTD … tº= -25ºC ÷ 70ºC |
| AH-2180897 |
PKVF-65/1B-N. sequence control, prepared for flamearrester LTD … tº= -40ºC ÷ 60ºC |
| AH-1640697 |
PKVF-65/1B-C. sequence control, with mounted cover. tº= -25ºC ÷ 70ºC |
| AH-1052604 |
PKV-65/1B. parallel control, prepared for flamearrester LTD … tº= -25ºC ÷ 70ºC |
PVRVF Coaming vacuum safety vent
 Vent valve, pneumatically actuated for tank venting,with sequence control, according ADR 2007,
with integrated pressure- vacuum valve according EN 13082 and EN 14595,
leak-proof in case of overturned tank,
in connection with vapour transfer valve part no. 2180904 suitable for mounting in
manhole covers entirely within contour of tank shell.
| AH-1362581 |
PVRVF 4 A1 – Vapour-transfer-valve with sequence control, pneumatically actuated, for mineral oil tankers, non-corrosive vapours. for DN 80 hose, Self-opening at vacuum 30-40 mbar, Temperature range: -25 to 70°C |
| AH-1641995 |
PVREV-100A1E. Coaming vacuum safety vent with
End-of-Line Flame Arrester
|
P/V valve and flamearresters SENING
| Part # |
Name |
| S-DO70-F |
P/V vent sequential |
| S-DBG-2 |
Flamearrester, outlet 2” BSP female thread
|
|
