STANDARD
Triclamp couplings are quick couplings used in working environments demanding high levels of hygiene; e.g. the food, pharmaceutical, chemical and life science industries. The Triclamp couplings are available in DIN 32676, INCH, IMPERIAL or ISO 1127 standards.
OPERATION
Triclamp couplings are easily identified by their flange design. The transition from the flange side to the hose side is made by a conical profile. The flange side is used to connect to another flange of the same dimension and standard. Users should ensure that only Triclamp’s complying with the same standard are connected together. The Triclamp seal (profiled or non-profiled) is fitted to one of the flanges. The second Triclamp is then brought together with the flange containing the seal. The heavy-duty clamp is applied to the flanges and closed. The coupling can easily be connected, disconnected and reused .
N.B.: Closing the heavy-duty clamp too tightly will alter the mechanical structure of the flange seal. Always use the recommended torque setting of 5 NM.
APPLICATION
For food, beverage, chemical, pharmaceutical and life science industry applications, as well as bio-engineering, filter and water treatment technology. | |
WORKING PRESSURE
ND 10 to ND 50: maximum 16 bar / 230 psi
ND 65 to ND 100: maximum 10 bar / 145 psi
TEMPERATURE
-30°C / -22°F up to +300°C / 572°F
MATERIAL
Triclamp coupling with hose shank
Stainless steel AISI 316Ti - EN 1.4571
Polypropylene or reinforced PTFE (on request)
HASTELLOY® C-276 alloy on request
Triclamp coupling with butt weld
Stainless steel AISI 316L - EN 1.4404
Seals
DIN 32676: NBR, EPDM, FPM, PTFE
INCH: NBR, EPDM, FPM, PTFE
ISO1127: Silicone, EPDM, FPM, GYLON BIO-PRO®
IMPERIAL: NBR, EPDM, FPM, PTFE
ASSEMBLY
Stainless steel safety clamps EN 14420-3 / DIN 2817 or ferrules for rubber hoses or swage ferrules |
 |
FEATURES
1. Lightly-grooved hose shank for assembly with EN 14420-3 safety clamps, swage ferrules
2. Bacterial growth is prevented due to the sanitary transition of the inside of the hose shank
3. The rounded end of the hose shank prevents hose damage
4. Low internal Ra value of < 0.3 μm (Ra test report available)
5. Outer diameter in relation with inner flange dimension. No disconnection necessary to define the type of tube system.
6. All sizes are fully vacuum-resistant up to 130°C / 265°F
7. Transition is possible between Triclamp couplings with same flange size/standard, same ID flange side and different hose dimension
8. EN 10204-type 3.1 certificate available on request |
For hose
Part # |
ND |
For hose |
OD Ø flange |
ID pipe connection flange side |
ID hose shank |
 |
| mm |
mm |
mm |
mm |
mm |
| RTRI-0634-10 |
10 |
6.0 |
34.0 |
10.0 |
4.0 |
| RTRI-0834-10 |
10 |
8.0 |
34.0 |
10.0 |
5.5 |
| RTRI-1034-10 |
10 |
10.0 |
34.0 |
10.0 |
7.0 |
| RTRI-1234-10 |
10 |
12.0 |
34.0 |
10.0 |
9.0 |
| RTRI-2034-10 |
10 |
20.0 |
34.0 |
10.0 |
15.0 |
| RTRI-2534-10 |
10 |
25.0 |
34.0 |
10.0 |
21.0 |
| RTRI-0834-16 |
15 |
8.0 |
34.0 |
16.0 |
5.5 |
| RTRI-1034-16 |
15 |
10.0 |
34.0 |
16.0 |
7.0 |
| RTRI-1234-16 |
15 |
12.0 |
34.0 |
16.0 |
9.0 |
| RTRI-2034-16 |
15 |
20.0 |
34.0 |
16.0 |
15.0 |
| RTRI-2534-16 |
15 |
25.0 |
34.0 |
16.0 |
21.0 |
| RTRI-0834-20 |
20 |
8.0 |
34.0 |
20.0 |
5.5 |
| RTRI-1034-20 |
20 |
10.0 |
34.0 |
20.0 |
7.0 |
| RTRI-1234-20 |
20 |
12.0 |
34.0 |
20.0 |
9.0 |
| RTRI-2034-20 |
20 |
20.0 |
34.0 |
20.0 |
15.0 |
| RTRI-2534-20 |
20 |
25.0 |
34.0 |
20.0 |
21.0 |
| RTRI-1250-26 |
25 |
12.0 |
50.5 |
26.0 |
9.0 |
| RTRI-2050-26 |
25 |
20.0 |
50.5 |
26.0 |
15.0 |
| RTRI-2550-26 |
25 |
25.0 |
50.5 |
26.0 |
21.0 |
| RTRI-3250-26 |
25 |
32.0 |
50.5 |
26.0 |
28.0 |
| RTRI-3850-26 |
25 |
38.0 |
50.5 |
26.0 |
33.5 |
| RTRI-1250-32 |
32 |
12.0 |
50.5 |
32.0 |
9.0 |
| RTRI-2050-32 |
32 |
20.0 |
50.5 |
32.0 |
15.0 |
| RTRI-2550-32 |
32 |
25.0 |
50.5 |
32.0 |
21.0 |
| RTRI-3250-32 |
32 |
32.0 |
50.5 |
32.0 |
28.0 |
| RTRI-3850-32 |
32 |
38.0 |
50.5 |
32.0 |
33.5 |
| RTRI-1250-38 |
40 |
12.0 |
50.5 |
38.0 |
9.0 |
| RTRI-2050-38 |
40 |
20.0 |
50.5 |
38.0 |
15.0 |
| RTRI-2550-38 |
40 |
25.0 |
50.5 |
38.0 |
21.0 |
| RTRI-3250-38 |
40 |
32.0 |
50.5 |
38.0 |
28.0 |
| RTRI-3850-38 |
40 |
38.0 |
50.5 |
38.0 |
33.5 |
| RTRI-3850-38 |
40 |
38.0 |
50.5 |
38.0 |
33.5 |
| RTRI-3864-50 |
50 |
38.0 |
64.0 |
50.0 |
33.5 |
| RTRI-5064-50 |
50 |
50.0 |
64.0 |
50.0 |
43.5 |
| RTRI-6391-66 |
65 |
63.0 |
91.0 |
66.0 |
58.5 |
| RTRI-7591-66 |
65 |
75.0 |
91.0 |
66.0 |
70.5 |
| RTRI-7510-81 |
80 |
75.0 |
106.0 |
81.0 |
70.5 |
| RTRI-100106-81 |
80 |
100.0 |
106.0 |
81.0 |
94.0 |
| RTRI-100119-100 |
100 |
100.0 |
119.0 |
100.0 |
94.0 |
For welding
Part # |
ND |
OD tube |
ID tube |
OD flange |
 |
| mm |
mm |
mm |
mm |
| RTRL-10 |
10 |
13 |
10 |
34 |
| RTRL-15 |
15 |
19 |
16 |
34 |
| RTRL-20 |
20 |
23 |
20 |
34 |
| RTRL-25 |
25 |
29 |
26 |
50.5 |
| RTRL-32 |
32 |
35 |
32 |
50.5 |
| RTRL-40 |
40 |
41 |
38 |
50.5 |
| RTRL-50 |
50 |
53 |
50 |
64 |
Accessesoires
For flange |
Part # |
 |
Part # |
 |
| 25.0 |
TRIK-025 |
TRIP-025 |
| 34.0 |
TRIK-034 |
TRIP-034 |
| 50.5 |
TRIK-050 |
TRIP-050 |
| 64.0 |
TRIK-064 |
TRIP-064 |
| 77.5 |
TRIK-077 |
TRIP-077 |
| 91.0 |
TRIK-091 |
TRIP-091 |
| 106.0 |
TRIK-106 |
TRIP-106 |
| 119.0 |
TRIK-119 |
TRIP-119 |
| 130.0 |
TRIK-130 |
TRIP-130 |
|
